Adjusting a steel watch strap to fit perfectly around your wrist might seem daunting, but with the right too

Adjusting a steel watch strap to fit perfectly around your wrist might seem daunting, but with the right tools and these simple steps, you can easily do it yourself. Here’s a comprehensive guide on using a link removal tool to adjust your watch strap length.

Step-by-Step Guide

1. **Prepare the Link Removal Tool**: Loosen the tool’s handle and retract the pin pusher to its starting position.

2. **Align the Tool with the Watch Pin**: Position the pin you wish to remove under the pin pusher of the tool. Ensure the pin pusher is aligned with the pin to be removed.

3. **Secure the Watch Band**: Place the watch band in the slot of the link removal tool, making sure the pin’s direction matches the pusher. The pin should be pushed out from the side with no slot, not from the slotted side.

4. **Adjust to the Desired Length**: Remove the necessary links to achieve the perfect fit. Pay attention to remove an equal number of links from each side of the clasp to maintain balance.

Important Tips

– Ensure the link removal tool’s pin is precisely aligned with the watch band pin to avoid damaging the tool.
– Do not over-tighten the tool as it may break.
– When reassembling the band, insert the pins in the opposite direction of the arrow for easier assembly.

Alternative Method

If you find the band still too long, consider removing an equal number of links from both sides for symmetry. This ensures the watch remains centered on your wrist.

Tools/Materials Needed

– Link Removal Tool

Steps for Reassembly

1. **Compare the Direction of the Watch Chain**: Notice the arrows on the back of the band indicating the pin direction.
2. **Remove the Pin**: Loosen the link removal tool, place the band, and align the tool’s pin with the hole of the watch link. Tighten gently until the link pin pops out.
3. **Reinstall the Pin**: After adjusting the band to your wrist size, reconnect the two band sections and gently push or hammer the pin back into place.

Precautions

When reinstalling the pins, ensure the band has been adjusted correctly for your wrist size. Reconnect the band segments, and if necessary, use the link removal tool or a small hammer to reinsert the pins. Remember, when reinserting pins, do so in the opposite direction of the arrow for a smoother process.

Adhering to these steps and tips will help you adjust your steel watch strap like a pro, ensuring a comfortable and secure fit.