Reasons Why a Quartz Watch Might Stop Working
1. Battery Depletion: The most common cause for a quartz watch to stop is a
Reasons Why a Quartz Watch Might Stop Working
1. Battery Depletion: The most common cause for a quartz watch to stop is a depleted battery. Replacing the battery is the first thing to consider when your watch stops unexpectedly.
2. Poor Contact: Dirt on the contact springs can result in poor connection with the battery. Cleaning the contact points before reassembly often resolves the issue.
3. Magnetic Fields: Exposure to magnets can stop a quartz watch, though, unlike mechanical watches, quartz movements are not permanently affected and will resume once removed from the magnetic field.
4. Coil Circuit Break: Damage or oxidation can break the coil circuit, detectable via multimeter testing. This requires a coil replacement.
5. Gear Train Malfunction: Dust or foreign objects jamming the gear train can cause a stoppage. A thorough cleaning to remove debris is necessary.
6. No Output Signal: After ruling out other issues, a non-functioning integrated circuit board might be at fault, necessitating its replacement.
Solution: For repairs, visiting an authorized service center is recommended. Battery issues are easily rectified by replacement, while more severe issues like circuit board failures may require a watch exchange. It’s rare for new watches to face such problems, with most quartz watches typically showing signs of stopping around the two-year mark.
.
.