When faced with the unfortunate event of your watch getting soaked, there are a few straightforward approaches you can take to mitigate the damage. Here, I’ll share three easy methods to help your w
When faced with the unfortunate event of your watch getting soaked, there are a few straightforward approaches you can take to mitigate the damage. Here, I’ll share three easy methods to help your watch recover from moisture ingress.
Method 1: The Paper Towel and Lamp Technique
If your watch has been immersed in water, you can tightly wrap it with several layers of tissue paper or a moisture-absorbent velvet cloth. Then, place it near a 40-watt light bulb, approximately 15 cm away, and let it dry for about 30 minutes. This should evaporate the moisture inside the watch. It’s crucial to avoid placing the watch face directly near fire or high heat to prevent the watch glass from deforming due to heat exposure.
Method 2: The Wrist Flip
Turn the watch so the dial faces inward and the back casing outward, then wear it on your wrist. After about two hours, the moisture should dissipate. If the watch is severely water-damaged, it’s advisable to take it to a watchmaker for a servicing as soon as possible. They can oil the movement and remove any moisture, preventing rust from forming on the components.
Method 3: The Silica Gel Solution
Place your water-logged watch in a sealed container with granular silica gel. After several hours, remove the watch, and you should find that all the water has been absorbed. This method is not only simple and economical but also does not harm the watch’s accuracy or lifespan. If the silica gel has absorbed water multiple times, it can be regenerated by drying it at 120°C for a few hours, restoring its moisture-absorbing capability for repeated use.
Employing these methods can help save your watch from permanent damage due to water ingress. Always remember, prevention is better than cure, so take good care of your watch to avoid such situations.
.
.